Physics 9702/13 May/June 2022: question paper and mark scheme

Question

Which pair of quantities are physical quantities? A charge and ampere B efficiency and kilogram C pascal and strain D period and potential difference

Question

Which list of unit prefixes decreases in magnitude from left to right? A centi, deci, milli B deci, milli, centi C pico, kilo, milli D kilo, milli, pico

Question

The drag coefficient Cd is a number with no units. It is used to compare the drag on different cars at different speeds. Cd is given by the equation 2F Cd = v nρ A where F is the drag force on the car, ρ is the density of the air, A is the cross-sectional area of the car and v is the speed of the car. What is the value of n? A 1 B 2 C 3 D 4

Question

A micrometer screw gauge is used to measure the diameter of a small uniform steel sphere. The measurement of the diameter is 5.00 mm ± 0.01 mm. What is the percentage uncertainty in the calculated volume of the sphere, using these values? A 0.2% B 0.4% C 0.6% D 1.2%

Question

Forces of magnitudes 2 N, 4 N and 7 N combine to produce a resultant force. The magnitudes of the three forces are fixed, but the forces may act in any direction in the same plane. What is not a possible magnitude of the resultant force? A 0N B 5N C 8N D 13 N

Question

Two projectiles, X and Y, are fired into the air from the same place on level ground and reach the same maximum height, as shown. path of X path of Y ground Projectile X is fired vertically upwards and projectile Y is fired at an angle to the horizontal. Air resistance is negligible. Which statement is correct? A X and Y are at rest at their maximum heights. B X and Y are fired with the same speed. C X and Y take the same time to return to the ground. D X and Y travel the same distance.

Question

A small glider moves along a horizontal air track as shown. buffer glider air track air At each end of the air track, the glider has a perfectly elastic collision with a fixed buffer. The glider moves at a constant speed between collisions. Which graph represents the variation with time t of the velocity v of the glider as it moves between the two buffers? A B v v 0 0 0 t 0 t C D v v 0 0 0 t 0 t

Question

A car accelerates from rest. The graph shows the variation of the momentum of the car with time. momentum 0 0 time What is the meaning of the gradient of the graph at a particular time? A the kinetic energy of the car B the rate of change of kinetic energy of the car C the resultant force on the car D the velocity of the car

Question

A ball is dropped onto horizontal ground and bounces vertically upwards. When the ball is in contact with the ground, the following forces act: ● the weight W of the ball ● the contact force P exerted on the ground by the ball ● the contact force N exerted on the ball by the ground. ball W N ground P When the ball is in contact with the ground, the ball is momentarily stationary. At this instant, which relationship is correct? A N=P+W B N>P+W C N=W D N>W

Question

A person stands on the edge of a high cliff that is next to the sea. The person throws a stone vertically upwards. Air resistance acts on the stone. The stone eventually hits the sea. Which velocity–time graph best shows the motion of the stone from when it is released until it hits the sea? A B velocity velocity 0 0 0 time 0 time C D velocity velocity 0 0 0 time 0 time

Question

Skaters of masses 80 kg and 40 kg move directly towards each other and collide. Before the collision, the heavier skater is moving to the right at a speed of 2.0 m s–1 and the lighter skater is moving to the left at a speed of 1.0 m s–1. After the collision, the heavier skater moves to the right at a speed of 0.80 m s–1. What is the relative speed of separation of the two skaters? A 0.6 m s–1 B 1.4 m s–1 C 2.2 m s–1 D 2.6 m s–1

Question

Which statement describes the two forces in a couple? A They act in the same direction. B They act through the same point. C They produce zero resultant force. D They produce zero resultant moment.

Question

A street lamp is fixed to a wall by a metal rod and a cable. cable wall P metal rod lamp Which vector triangle could represent the forces acting on the end of the rod at point P? A B C D

Question

An unknown mass and a 1.00 kg mass are fixed at opposite ends of a bar. The bar has negligible mass and a length of 30.0 cm. The bar balances when supported by a pivot placed 20.0 cm from the unknown mass, as shown. 30.0 cm unknown mass 1.00 kg mass 20.0 cm bar pivot What is the unknown mass? A 333 g B 500 g C 667 g D 1000 g

Question

A block of wood of density ρ w has sides of length a. The block is immersed in a liquid of density ρ L. The top surface of the block is at a depth h below the surface of the liquid. liquid h block of wood a a a The acceleration of free fall is g. What is the upthrust acting on the block from the liquid? A ρ La3g B ρ wa3g C ρ Lhg D ρ Lag

Question

A technical article about diesel engines expresses the energy available from diesel fuel both as 41.8 MJ kg–1 and as 34.9 GJ m–3. What is the density of diesel fuel? A 8.35 × 102 kg m–3 B 1.20 × 103 kg m–3 C 8.35 × 105 kg m–3 D 1.20 × 106 kg m–3

Question

What is meant by the efficiency of a system? A the difference between the useful energy output from the system and the total energy input B the difference between the useful energy output from the system and the wasted energy output C the ratio of the useful energy output from the system to the total energy input D the ratio of the useful energy output from the system to the wasted energy output

Question

A car of weight 15 000 N is travelling along a horizontal road. velocity 24 m s–1 resistive force thrust force 3000 N 12 000 N At one instant, the thrust force acting on the car from the engine is 12 000 N and the resistive force acting on the car is 3000 N. The velocity of the car at this instant is 24 m s–1. What is the power output from the engine? A 72 kW B 220 kW C 290 kW D 360 kW

Question

The diagram shows the variation of a quantity y with a quantity x for objects in a uniform gravitational field. y 0 0 x What could x and y represent? x y A mass for different objects kinetic energy moving at the same speed B speed for an object kinetic energy of constant mass C vertical distance fallen for change of gravitational an object of constant mass potential energy D mass for different objects change of gravitational falling the same vertical distance potential energy

Question

A steel wire has a length of 300 cm and a cross-sectional area of 0.50 mm2. The Young modulus of steel is 2.0 × 1011 Pa. One end of the wire is attached to a fixed point. A load of 10 N is hung from the other end. The wire obeys Hooke’s law. What is the extension of the wire? A 3.0 × 10–7 m B 3.0 × 10–5 m C 3.0 × 10–4 m D 3.0 × 10–2 m

Question

The extension of a copper wire is measured for different forces applied to the wire. A graph is plotted to show the variation of the force on the wire against extension. The maximum force is applied at point P. force P Q R S 0 0T extension Which statement must be correct? A Point R is the limit of proportionality. B The elastic potential energy of the wire at point S is given by the area under the graph between points T and S. C There is no plastic deformation between points Q and P. D The wire obeys Hooke’s law up to a point between R and Q.

Question

The variation with distance x of the displacement y of a transverse wave on a rope is shown at time t = 0. The wave has a frequency of 0.5 Hz. A point P on the rope is marked. The diagram shows the original position of P and four new positions. What is the position of P at time t = 1 s? direction of P C D wave travel y A 0 0 x B

Question

A cathode-ray oscilloscope (CRO) is connected to a microphone which detects sound of constant frequency. The trace on the screen of the CRO is shown. Which property of the sound wave is measured using only information from the CRO? A amplitude B period C speed D wavelength

Question

A transverse wave and a longitudinal wave both travel in the same direction down a long stretched spring. Which statement is not correct for these two forms of wave? A The displacement measurements for the particles of the two waves are made at right angles to each other. B The energy transferred by the two waves is in the same direction. C The velocities of the two waves are in the same direction. D The wavelength measurements for the two waves are made at right angles to each other.

Question

A man standing next to a stationary train hears sound of frequency 400 Hz emitted from the train’s horn. The train then moves directly away from the man and sounds its horn when it has a speed of 50 m s–1. The speed of sound in the air is 340 m s–1. What is the difference in frequency of the sound heard by the man on the two occasions? A 51 Hz B 69 Hz C 350 Hz D 470 Hz

Question

Which list of regions of the electromagnetic spectrum is in order of increasing wavelength from left to right? A gamma-ray → ultraviolet → infrared B infrared → microwave → ultraviolet C microwave → X-ray → infrared D X-ray → ultraviolet → gamma-ray

Question

The principle of superposition states that a certain quantity is added when two or more waves meet at a point. What is this quantity? A amplitude B displacement C intensity D wavelength

Question

A stationary sound wave is formed in a gas-filled tube of length L, which is closed at one end by a piston. The length of the tube can be altered by moving the piston. The length of the tube and the frequency of the sound are varied so that the stationary wave always has two antinodes and two nodes, as shown. gas-filled tube piston L The graph shows the variation of the frequency f of the stationary sound wave with the length L of the tube. 5000 f / Hz 4000 3000 2000 1000 0 0 5 10 15 20 25 L / cm What is the speed of sound in the gas in the tube? A 150 m s–1 B 230 m s–1 C 300 m s–1 D 340 m s–1

Question

The diagrams show the diffraction of water waves in a ripple tank as they pass through a gap between two barriers. Which diagram is correct? A B C D

Question

A beam of light from a laser is incident normally on a double slit. Interference fringes are seen on a screen placed parallel to the double slit. The separation of the two slits is a. The distance between the slits and the screen is D. The distance between the centres of two adjacent bright fringes is x. D and a are both halved. What is the distance between the centres of two adjacent bright fringes after these changes? x A B x C 2x D 4x 2

Question

A beam of light of wavelength 400 nm is incident normally on a diffraction grating that has 300 lines per millimetre. The light passes through the grating and produces a series of maxima which are observed on a semicircular screen, as shown. screen diffraction grating light, wavelength 400 nm VIEW FROM ABOVE What is the total number of maxima observed on the screen? A 8 B 9 C 16 D 17

Question

Two wires, X and Y, are made from the same metal. The diameter of wire Y is twice that of wire X. Wire X, wire Y and a battery are connected in series. average drift speed of free electrons in wire X What is the ratio ? average drift speed of free electrons in wire Y 1 1 2 4 A B C D 4 2 1 1

Question

A resistor has resistance R. When the potential difference (p.d.) across the resistor is V, the current in the resistor is I. The power dissipated in the resistor is P. Work W is done when charge Q flows through the resistor. What is not a valid relationship between these variables? A I= P B Q=W C R = P2 D R=V V V I P

Question

A fixed resistor and a filament lamp are connected in series to a power supply. The I–V characteristics for the two components are shown. fixed resistor 0.5 I/A 0.4 0.3 0.2 0.1 0 0 2 4 6 8 10 V/V filament lamp 0.5 I/A 0.4 0.3 0.2 0.1 0 0 2 4 6 8 10 V/V The current in the fixed resistor is 0.34 A. What is the resistance of the filament lamp? A 0.081 Ω B 12 Ω C 15 Ω D 18 Ω

Question

A piece of conducting putty (modelling clay) of constant resistivity is formed into a cylindrical shape. The resistance R between its flat ends (shaded) is measured. L The same volume of putty is re-formed into cylinders of different lengths L, and the resistance R between the flat ends is measured for each value of L. Which graph best shows the variation of R with L? A B C D R R R R 0 0 0 0 0 L 0 L 0 L 0 L

Question

The diagram shows the symbol for a component that may be used in an electrical circuit. Which component is represented by this circuit symbol? A buzzer B electric bell C loudspeaker D microphone

Question

Which row correctly describes Kirchhoff’s laws? physics principle physics principle Kirchhoff’s first law applied for Kirchhoff’s second law applied for first law second law A The sum of the conservation The sum of the e.m.f.s conservation currents entering a of charge around any closed loop of energy junction equals the in a circuit equals the sum of the currents sum of the p.d.s around leaving the junction. the same loop. B The sum of the conservation The sum of the e.m.f.s conservation currents entering a of energy around any closed loop of charge junction equals the in a circuit equals the sum of the currents sum of the p.d.s around leaving the junction. the same loop. C The sum of the e.m.f.s conservation The sum of the currents conservation around any closed of energy entering a junction of charge loop in a circuit equals equals the sum of the the sum of the p.d.s currents leaving the around the same loop. junction. D The sum of the e.m.f.s conservation The sum of the currents conservation around any closed of charge entering a junction of energy loop in a circuit equals equals the sum of the the sum of the p.d.s currents leaving the around the same loop. junction.

Question

A potential divider circuit is formed by connecting a battery of negligible internal resistance in series with two variable resistors, as shown. RX RY VX The variable resistors have resistances RX and RY. VX is the potential difference (p.d.) across the variable resistor with resistance RX. RX and RY are both changed at the same time. Which combination of changes must cause VX to increase? RX RY A larger larger B larger smaller C smaller larger D smaller smaller

Question

An actinium nucleus has a nucleon number of 227 and a proton number of 89. It decays to form a radium nucleus, emitting a β– particle and an α-particle in the process. What are the nucleon number and the proton number of this radium nucleus? nucleon number proton number A 223 87 B 223 88 C 224 87 D 225 86

Question

Which statement is not correct? A A meson consists of three quarks. B A proton is a baryon. C A quark is a fundamental particle. D There are six flavours (types) of quark.