Question 11 mark
Question
What is the best estimate of the wavelength of green light? A 260 nm B 540 nm C 780 nm D 920 nm
Answer
B
Free until 14 Nov · 80% off for the first 100 · Pricing
Cambridge AS & A Level Physics (9702), Paper 1 Multiple Choice, October/November 2023. Read both free below, or download them. Done the paper? Get it marked by AI against this mark scheme.
9702_w23_qp_139702_w23_ms_139702/13/O/N/23
Each question and its answer from the key, as text. Diagrams and graphs are in the question paper above.
Question
What is the best estimate of the wavelength of green light? A 260 nm B 540 nm C 780 nm D 920 nm
Answer
B
Question
In an electric circuit, an ammeter reads 2 μA. In a second circuit, the ammeter reads 1 mA. How many times larger is the current in the second circuit compared with the current in the first circuit? A 500 B 5000 C 500 000 D 5 000 000
Answer
A
Question
A set of repeated measurements is made of a fixed quantity. An average of these measurements is calculated. What is the effect of averaging on the random error and the systematic error in the measurements? A Random error and systematic error are both reduced. B Random error and systematic error are both unaffected. C Random error is reduced but systematic error is unaffected. D Random error is unaffected but systematic error is reduced.
Answer
C
Question
A boat is crossing a river in which the water is moving at a speed of 4.0 m s–1 from left to right. river bank NOT TO SCALE velocity of water, 4.0 m s–1 velocity of boat in T still water, 6.0 m s–1 resultant velocity, v river bank In still water, the speed of the boat is 6.0 m s–1. The boat is directed at an angle θ to a line perpendicular to the river banks. The resultant velocity v of the boat is in a direction perpendicular to the river banks. What are the values of θ and v? θ/° v / m s–1 A 42 4.5 B 42 7.2 C 48 4.5 D 48 7.2
Answer
A
Question
A student walks at a constant speed for a distance of 50 m in a time of 40 s. The student rests for a time of 10 s and then walks back to the starting point at a constant speed in a time of 30 s. What is the distance–time graph for the motion of the student? A B 100 100 distance / m distance / m 50 50 0 0 0 20 40 60 80 0 20 40 60 80 time / s time / s C D 100 100 distance / m distance / m 50 50 0 0 0 20 40 60 80 0 20 40 60 80 time / s time / s
Answer
D
Question
The time taken for an object to fall from rest through a certain distance on Mars is TM. The time taken for the same object to fall from rest through the same distance on Earth is TE. The acceleration of free fall on Mars is 3.71 m s–2. Assume that air resistance is negligible on both Earth and Mars. TM What is the ratio ? TE A 0.378 B 0.615 C 1.63 D 2.64
Answer
C
Question
Which statement about mass is correct? A Mass has a magnitude and a direction. B Mass resists changes in motion. C The greater the mass of an object, the greater its acceleration when falling in a vacuum. D The mass of an object depends on its location.
Answer
B
Question
A snooker ball has a mass of 200 g. It hits the cushion of a snooker table and rebounds along its original path. The ball arrives at the cushion with a speed of 14.0 m s–1 and then leaves it with a speed of 7.0 m s–1. The ball and the cushion are in contact for a time of 0.60 s. What is the average force exerted on the ball by the cushion? A 1.4 N B 2.3 N C 4.2 N D 7.0 N
Answer
D
Question
A ball falls from rest through air and eventually reaches a constant velocity. For this fall, forces X and Y vary with time as shown. force X force Y 0 0 0 time 0 time What could be forces X and Y ? force X force Y A air resistance resultant force B air resistance weight C upthrust resultant force D upthrust weight
Answer
A
Question
An object X of mass 0.30 kg is travelling in a straight line at a constant velocity of 3.0 m s–1 on a horizontal frictionless surface. Object X collides with a stationary object Y of mass 0.50 kg. After the collision, X moves with a velocity of 2.0 m s–1 at an angle of 60° to its direction before the collision. Object Y moves with a velocity v at an angle of 41° to the direction of X before the collision, as shown. Y v 3.0 m s–1 41q X Y 60q 0.30 kg 0.50 kg X 2.0 m s–1 before collision after collision What is the value of v? A 0.80 m s–1 B 1.2 m s–1 C 1.6 m s–1 D 1.8 m s–1
Answer
C
Question
A uniform rigid beam of length 3.2 m is pivoted at its centre. Two children sit at the opposite ends of the beam, as shown. child mass 24 kg 3.2 m child mass 36 kg pivot 20q One child has a mass of 24 kg. The other child has a mass of 36 kg. The heavier child causes one end of the beam to permanently rest on the ground, so that the beam makes an angle of 20° to the horizontal ground. What is the moment of the weight of the 24 kg child about the pivot? A 72 N m B 130 N m C 350 N m D 380 N m
Answer
C
Question
Two parts of a sailing boat are the mast and the boom. The mast is a vertical rigid beam and the boom is a horizontal rigid beam. One end of the boom is attached to the mast by a pivot. The other end of the boom is connected to the mast by a rope, as shown. rope mast T 40q pivot boom 200 N The rope is at an angle of 40° to the horizontal and exerts a tension force T on the boom. The weight of the boom is 200 N. The mass of the boom is uniformly distributed along its length. The boom is in equilibrium. What is the magnitude of T ? A 130 N B 160 N C 260 N D 310 N
Answer
B
Question
Full-fat milk is made up of fat-free milk mixed with fat. A volume of 1.000 × 10–3 m3 of full-fat milk has a mass of 1.035 kg. It contains 4.00% fat by volume. The density of fat-free milk is 1.040 × 103 kg m–3. What is the density of fat? A 1.25 × 102 kg m–3 B 9.15 × 102 kg m–3 C 9.28 × 102 kg m–3 D 1.16 × 103 kg m–3
Answer
B
Question
Which expression for pressure is correct? A force per unit area B mass per unit area C mass per unit volume D weight per unit volume
Answer
A
Question
A wooden cylinder floats partially submerged in a bath of water. A force F is applied to the cylinder until it is just fully submerged. wooden cylinder water F Which statement is not correct? A Some of the water gains gravitational potential energy. B The cylinder loses gravitational potential energy. C Work is done by force F on the cylinder. D Work is done by the upthrust on the cylinder.
Answer
D
Question
A system has a useful power output of 4.0 W and a wasted power of 16 W. What is the efficiency of the system? A 5.0% B 20% C 25% D 80%
Answer
B
Question
A parachutist is falling towards the ground at a constant speed v. The rate at which she is losing gravitational potential energy is R. The acceleration of free fall is g. What is the mass of the parachutist? gv R 2R v2 A B C D R gv v2 2R
Answer
B
Question
A copper wire of diameter 1.6 mm is stretched within its limit of proportionality by a tensile force of 430 N. The Young modulus of copper is 130 GPa. What is the strain in the wire? A 4.1 × 10–4 B 1.3 × 10–3 C 1.6 × 10–3 D 5.2 × 10–3
Answer
C
Question
Compressive forces are applied normally to the end faces of a cylinder of initial length L. The cylinder is compressed by the forces so that its length decreases to 0.6L. After the compressive forces are removed, the cylinder’s length increases to 0.8L. cylinder L 0.6L 0.8L before compressive compressive after compressive forces applied forces applied forces removed What describes the deformation of the cylinder when its length was 0.6L? A both elastic and plastic B elastic only C plastic only D neither elastic nor plastic
Answer
A
Question
When sound travels through air, the air particles vibrate. A graph of displacement against time for a single air particle is shown. displacement 0 time 0 T 2T Which graph shows how the kinetic energy of the air particle varies with time? A B kinetic kinetic energy energy 0 time 0 time 0 T 2T 0 T 2T C D kinetic kinetic energy energy 0 time 0 time 0 T 2T 0 T 2T
Answer
D
Question
A wave travels on the surface of water. P, Q, R and S are four particles of water on the surface. The diagram shows the positions of the particles at one instant. The direction of travel of the wave is from left to right. direction of wave travel P R Q S Which two particles are about to move upwards? A P and R B P and S C R and S D Q and S
Answer
D
Question
A loudspeaker emits sound of frequency fs. The loudspeaker is attached to a car that moves with increasing speed directly towards a stationary observer. Which statement describes the frequency of the sound heard by the observer? A a frequency greater than fs and increasing B a frequency greater than fs but decreasing C a frequency less than fs and decreasing D a frequency less than fs but increasing
Answer
A
Question
Which statement about electromagnetic waves in a vacuum is correct? A Amplitude is inversely proportional to velocity. B Frequency is inversely proportional to wavelength. C Intensity is proportional to amplitude. D Velocity is proportional to wavelength.
Answer
B
Question
A vertically polarised electromagnetic wave of intensity I0 is incident normally on a polarising filter. The transmission axis of the filter is at an angle of 30° to the vertical. The transmitted wave from the first filter is then incident normally on a second polarising filter. The transmission axis of this filter is at an angle of 90° to the vertical. transmission axis 30q polarising filters transmission axis vertically polarised electromagnetic wave What is the intensity of the wave after passing through the second filter? A 0 B 0.063 I0 C 0.19 I0 D 0.56 I0
Answer
C
Question
Which statement concerning a stationary wave is correct? A All the particles between two adjacent nodes oscillate in phase. B The amplitude of the stationary wave is equal to the amplitude of one of the waves creating it. C The wavelength of the stationary wave is equal to the separation of two adjacent nodes. D There is no displacement of a particle at an antinode at any time.
Answer
A
Question
Stationary sound waves can be formed in the air columns of pipes. One type of pipe is closed at one end and open at the other end. Another type of pipe is open at both ends. Which pipe can form a stationary sound wave with the lowest frequency? A B C D 2L 2L L L
Answer
B
Question
Water waves in a ripple tank are made to pass through a small gap, as shown. Which diagram shows the waves after they have passed through the gap? A B C D
Answer
A
Question
Light of a single wavelength is incident normally on a double slit. The slit separation can be varied. A screen is placed a fixed distance away from the double slit. The screen and double slit are parallel. A pattern of bright interference fringes is observed on a screen. NOT TO a SCALE light double slit screen Which graph best shows the variation of the separation x of the bright interference fringes with the slit separation a? A B C D x x x x 0 0 0 0 0 a 0 a 0 a 0 a
Answer
A
Question
A diffraction grating is used to measure the wavelength of light. The spacing of the slits in the grating is 1.15 × 10–6 m. The angle between the first-order diffraction maxima is 60.0°, as shown. grating light 60.0q What is the wavelength of the light? A 288 nm B 498 nm C 575 nm D 996 nm
Answer
C
Question
What could not be used to create an electric current? A alpha-particles B beta-particles C neutrons D protons
Answer
C
Question
What is the definition of the potential difference (p.d.) across a component? A the energy transferred per unit charge B the energy transferred per unit current C the power transferred per unit charge D the power transferred per unit current
Answer
A
Question
The resistance of a filament lamp increases as the current in it increases. What is the reason for this? A The charge of each charge carrier increases. B The potential difference across the filament decreases. C The power dissipated by the filament decreases. D The temperature of the filament increases.
Answer
D
Question
A battery of electromotive force (e.m.f.) 12 V and negligible internal resistance is connected to a fixed resistor of resistance 40 Ω and a thermistor of resistance RT, as shown. 40 : 12 V RT Initially, the temperature of the thermistor is 15 °C and the current in the circuit is 0.10 A. The temperature of the thermistor then changes, which causes the current to increase to 0.12 A. How does the temperature of the thermistor change and what is RT at the new temperature? temperature RT at new of thermistor temperature / Ω A increases 60 B decreases 60 C increases 100 D decreases 100
Answer
A
Question
A cell of electromotive force (e.m.f.) 3.0 V and internal resistance 0.50 Ω is connected to a variable resistor, a voltmeter and an ammeter, as shown. The resistance of the variable resistor is varied. The reading on the ammeter I and the reading on the voltmeter V are recorded. 3.0 V 0.50 : A V Which graph shows how V varies with I ? A B 0.50 3.0 V/V V/V 0 0 0 6.0 0 0.5 I/A I/A C D 3.0 6.0 V/V V/V 0 0 0 6.0 0 3.0 I/A I/A
Answer
C
Question
Three resistors, R1, R2 and R3, are connected in parallel to a cell. The currents in the resistors are I1, I2 and I3. The potential differences across the resistors are V1, V2 and V3. The current in the cell is I0. The potential difference across the cell is V0, as shown. V0 I0 V1 I1 R1 V2 I2 R2 V3 I3 R3 Which equation can be obtained by applying Kirchhoff’s second law to the circuit? A I0 = I1 = I2 = I3 B I0 = I1 + I2 + I3 C V0 = V1 = V2 = V3 D V0 = V1 + V2 + V3
Answer
C
Question
Three resistors, each of resistance R, are connected in a network, as shown. R X Y R R The total resistance between points X and Y is 8.0 Ω. What is the value of R ? A 2.7 Ω B 4.0 Ω C 5.3 Ω D 12 Ω
Answer
D
Question
A potentiometer and a driver cell of electromotive force (e.m.f.) E are used to measure the e.m.f. of a new cell. A sliding contact at P is moved along a resistance wire QR until the reading on the galvanometer is zero. driver cell E Q R P new cell What is an essential requirement for the e.m.f. of the new cell to be measured accurately? A The e.m.f. of the driver cell must be less than the e.m.f. of the new cell. B The galvanometer must have a large resistance. C The internal resistance of the new cell must be zero. D The resistance per unit length of the wire QR must be constant.
Answer
D
Question
The table shows the number of nucleons and the total number of particles (protons, neutrons and electrons) in neutral atoms of four nuclides W, X, Y and Z. number of total number nucleons of particles W 19 30 X 19 31 Y 21 32 Z 22 31 Which two nuclides are isotopes of each other? A W and X B W and Y C X and Z D Y and Z
Answer
B
Question
When a sample of a radioactive isotope decays by α-particle emission, the α-particles emitted have a single discrete energy. When a sample of a radioactive isotope decays by β– particle emission, the β– particles emitted have a continuous range of energies. What is the explanation for this? A An antineutrino is emitted with a β– particle but not with an α-particle. B An antineutrino is emitted with an α-particle but not with a β– particle. C The α-particles have much more energy than the β– particles. D The β– particles have much more energy than the α-particles.
Answer
A
Question
Some particles are a combination of three quarks. Which combination of quarks does not result in a particle with a charge of either +1.6 × 10–19 C or zero? A up, down, down B up, strange, strange C up, up, down D up, up, up
Answer
D
Checked your answers against these? Let AI mark the whole paper, on your own working.
Mark my 9702/13It's multiple choice: one mark for each correct answer, and nothing taken off for a wrong one. The mark scheme is the answer key.
Done this paper? Upload your script and CIE Buddy's AI marker marks it question by question against this exact scheme, puts the ticks on your own working and says what each lost mark needed.
Question papers and mark schemes © Cambridge University Press & Assessment. CIE Buddy is independent and not connected to Cambridge.
On this page, free: the mark scheme for AS & A Level Physics 9702/13, October/November 2023 (9702_w23_ms_13), and the question paper (9702_w23_qp_13), to read or download, with each question's marking points written out underneath.
Physics 9702/13 for October/November 2023 is out of 40 marks, with 1 hour 15 minutes to answer it.
Yes. Upload your answers to 9702/13/O/N/23 as a PDF or photos, and CIE Buddy marks every question against this paper's official mark scheme, using Cambridge's marking rules. You get your score, each lost mark explained on your own script, and the topics to revise. It's a guide, not an official Cambridge grade.